DIYAPASON-L Digest #58 - Friday, March 10, 2000
 
Re: [Residence Organs]  Re: [Residence Organs] Need Tuner advice
  by "Eric Sagmuller" <ess4@psu.edu>
top board
  by "Gary Black" <gblack@ocslink.com>
Re: [Residence Organs]  Re: [Residence Organs] Need Tuner advice
  by "Jimmy" <jrbaird@erols.com>
Re: [Residence Organs]  Re: [Residence Organs] Need Tuner advice
  by <Pipewheezr@aol.com>
Re: [Residence Organs]  top board
  by "Eric Sagmuller" <ess4@psu.edu>
 

(back) Subject: Re: [Residence Organs] Re: [Residence Organs] Need Tuner advice From: "Eric Sagmuller" <ess4@psu.edu> Date: Fri, 10 Mar 2000 07:58:23 -0500   Jimmy wrote:   > >The 320 is set for equal temperament if you don't touch any dials, >however, by changing the vineer settings (+ and - cents), you can set >any temperament that you want. I believe that they now furnish charts for this, by if not, they are available.   OK. I can see how this would be possible. I little more work though than a tuner with preset temperaments. Once the initial octave is tuned in the organ though, then one should be able to tune the rest of the organ from this (I think).   Eric      
(back) Subject: top board From: "Gary Black" <gblack@ocslink.com> Date: Sun, 27 Feb 2000 03:58:32 -0600   This is a multi-part message in MIME format.   ------=3D_NextPart_000_0009_01BF80D6.EA01B3C0 Content-Type: text/plain; charset=3D"iso-8859-1" Content-Transfer-Encoding: quoted-printable   HI list, I, with the help of five of the neighbors, finally installed =3D the top board on my eight rank great chest last night. When the chest was new it was manufactured by =3D the Gress-Miles factory and now, with new magnets and new wiring is =3D ready to go. I having a blower box made, so when that is finished I can = =3D get wind in it. Gary Black   ------=3D_NextPart_000_0009_01BF80D6.EA01B3C0 Content-Type: text/html; charset=3D"iso-8859-1" Content-Transfer-Encoding: quoted-printable   <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META content=3D3D"text/html; charset=3D3Diso-8859-1" =3D http-equiv=3D3DContent-Type> <META content=3D3D"MSHTML 5.00.2314.1000" name=3D3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=3D3D#ffffff> <DIV><FONT face=3D3DArial size=3D3D2>HI list,&nbsp; I, with the help of = five =3D of the=3D20 neighbors, finally installed the top board on my eight rank</FONT></DIV> <DIV><FONT face=3D3DArial size=3D3D2>great chest last night.&nbsp; When = the =3D chest was=3D20 new it was manufactured by the Gress-Miles factory and now, with new =3D magnets and=3D20 new wiring is ready to go.&nbsp; I having a blower box made, so when =3D that is=3D20 finished I can get wind in it.&nbsp; Gary =3D Black</FONT></DIV></BODY></HTML>   ------=3D_NextPart_000_0009_01BF80D6.EA01B3C0--    
(back) Subject: Re: [Residence Organs] Re: [Residence Organs] Need Tuner advice From: "Jimmy" <jrbaird@erols.com> Date: Fri, 10 Mar 2000 09:30:43 -0500   > OK. I can see how this would be possible. I little more work though > than a tuner with preset > temperaments. Once the initial octave is tuned in the organ though, > then one should be able to tune the rest of the organ from this (I > think). > > Eric > I set the temperament with the 'tuner', then turn it off, and tune the rest of the organ by octaves.   Jimmy  
(back) Subject: Re: [Residence Organs] Re: [Residence Organs] Need Tuner advice From: <Pipewheezr@aol.com> Date: Fri, 10 Mar 2000 10:48:15 EST   Hi yallllllll,Me and the organ guy down the hill have voiced,roughly,the = 4' oct in the great and have tuned middle c up to the next c with a tuner = ,then set temprament,then tuned the rest from there.Soon we are going to work = on the voicing,when I get the rest of the pipes in the divisition.Btu that seem's to be the usual order of thing's.We have not voiced a string = yet,that is want this uses during tuning's at his churches. Dennis Allen  
(back) Subject: Re: [Residence Organs] top board From: "Eric Sagmuller" <ess4@psu.edu> Date: Fri, 10 Mar 2000 12:35:07 -0500   --=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D_-1259412786=3D=3D_ma=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D Content-Type: text/plain; charset=3D"us-ascii" ; format=3D"flowed"   Happy to see you're making progress Gary! Now if I could only get ahead some on mine, but it's hard when there are many other things to be done.   Well I've got the Spencer in position in my basement with the Static reservoir hung above. I got the holes cut through the floors up to my second floor chamber. I've got all my Spiral duct pipework and Hardcast ready. Now for some time.   I'm also in the process of installing springs on my reservoir I'm using temporarily with a Meidinger in the chamber. On an earlier post I had mentioned I had a bouncing problem with the reservoir. It only has weights on it now so hopefully the springs will help stabilize it.   Eric       >HI list, I, with the help of five of the neighbors, finally >installed the top board on my eight rank >great chest last night. When the chest was new it was manufactured >by the Gress-Miles factory and now, with new magnets and new wiring >is ready to go. I having a blower box made, so when that is >finished I can get wind in it. Gary Black   --=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D_-1259412786=3D=3D_ma=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D Content-Type: text/enriched; charset=3D"us-ascii" Content-Transfer-Encoding: quoted-printable   Happy to see you're making progress Gary! Now if I could only get ahead some on mine, but it's hard when there are many other things to be done.=3D20     Well I've got the Spencer in position in my basement with the Static reservoir hung above. I got the holes cut through the floors up to my second floor chamber. I've got all my Spiral duct pipework and Hardcast ready. Now for some time.     I'm also in the process of installing springs on my reservoir I'm using temporarily with a Meidinger in the chamber. On an earlier post I had mentioned I had a bouncing problem with the reservoir. It only has weights on it now so hopefully the springs will help stabilize it.     Eric         <excerpt><fontfamily><param>Arial</param><smaller>HI list, I, with the help of five of the neighbors, finally installed the top board on my eight rank   great chest last night. When the chest was new it was manufactured by the Gress-Miles factory and now, with new magnets and new wiring is ready to go. I having a blower box made, so when that is finished I can get wind in it. Gary Black   </smaller></fontfamily></excerpt><fontfamily><param>Arial</param><smaller><= /=3D smaller></fontfamily>   --=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D_-1259412786=3D=3D_ma=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D--