DIYAPASON-L Digest #276 - Wednesday, March 7, 2001
 
RE: [Residence Organs]  building windchests
  by "STEVE PITTS" <steve.pitts@adtran.com>
Re: [Residence Organs]  building windchests
  by "Jimmy" <jrbaird@erols.com>
Re: [Residence Organs]  building windchests
  by "Kelvin Smith" <KelvinSmith@untraveledroad.com>
Re: [Residence Organs]  building windchests
  by "Jimmy" <jrbaird@erols.com>
 

(back) Subject: RE: [Residence Organs] building windchests From: "STEVE PITTS" <steve.pitts@adtran.com> Date: Wed, 7 Mar 2001 16:58:18 -0600     What commonly made tool could be used for creating the tapered holes on a toe-board?    
(back) Subject: Re: [Residence Organs] building windchests From: "Jimmy" <jrbaird@erols.com> Date: Wed, 07 Mar 2001 19:51:08 -0500   STEVE PITTS wrote: > > What commonly made tool could be used for creating the tapered holes on = a > toe-board?     I use a cone shaped rotary stone, put in the drill press at high speed, and it will both make the cone shape, and burn it also. I pre-drill the hole first.   Jimmy Baird  
(back) Subject: Re: [Residence Organs] building windchests From: "Kelvin Smith" <KelvinSmith@untraveledroad.com> Date: Wed, 7 Mar 2001 19:12:56 -0700   Where can you buy the rotary stone?   Kelvin   >STEVE PITTS wrote: >> >> What commonly made tool could be used for creating the tapered holes on = a >> toe-board? > > >I use a cone shaped rotary stone, put in the drill press at >high speed, and it will both make the cone shape, and burn >it also. I pre-drill the hole first. > >Jimmy Baird > >DIYAPASON-L: a Discussion list for owners and builders of their own >Residence Pipe Organs. >HOMEPAGE : http://www.diyapason.pipechat.org >List: mailto:DIYAPASON-L@pipechat.org >Administration: mailto:owner-DIYAPASON@pipechat.org        
(back) Subject: Re: [Residence Organs] building windchests From: "Jimmy" <jrbaird@erols.com> Date: Wed, 07 Mar 2001 22:05:29 -0500   Kelvin Smith wrote: > > Where can you buy the rotary stone? > > Kelvin   They come in about an inch or more diameter, with a 1/4" shank. Most hardware stores carry them for a few dollars each.   Jimmy > > >STEVE PITTS wrote: > >> > >> What commonly made tool could be used for creating the tapered holes = on a > >> toe-board? > > > > > >I use a cone shaped rotary stone, put in the drill press at > >high speed, and it will both make the cone shape, and burn > >it also. I pre-drill the hole first. > > > >Jimmy Baird