DIYAPASON-L Digest #621 - Saturday, August 10, 2002
 
Re: [Residence Organs]  archives
  by "D Heimer" <dheimer@sensible.net>
Re: Encasing Blowers
  by <TheGluePot@aol.com>
 

(back) Subject: Re: [Residence Organs] archives From: "D Heimer" <dheimer@sensible.net> Date: Sat, 10 Aug 2002 10:12:46 -0400   Oops, My bad. Mea culpa. Dave Heimer   ----- Original Message ----- From: "David Scribner" <david@blackiris.com>       > At 3:55 PM -0400 08/09/2002, W. D. Heimer wrote: > >OK guys, I give up. Where are y'all hiding the rest of the > >archives? Dave Heimer > > > > > The Archives aren't hiding - they have to be processed manually to > get on the web site > > David Scribner > List Owner > DIYAPASON-L   > >    
(back) Subject: Re: Encasing Blowers From: <TheGluePot@aol.com> Date: Sat, 10 Aug 2002 14:03:49 EDT   Welcome Al:   First off it is always a good idea to have enough room around the blower = to be able to service it. The best enclosure seems to be fire resistant = drywall construction. You will get heat build up and this will throw your tuning = off so an intake with a filter and an exhaust out into the open air that is = fan assisted is advisable. I did an article for *The Glue Pot* on how to calculate heat build up in a blower room that factors in the horsepower of =   the motor but if you have a forced ventilation of the blower room you = won't get much of a heat rise. As you can tell, many factors are involved and there is not enough room here for a comprehensive answer. Just know that = the blower produces heat that you normally do not want to go into the organ.   Al Sefl Also a great source of hot air...