DIYAPASON-L Digest #487 - Wednesday, January 9, 2002
 
Orgoblo amperage/heaters
  by <Mpmollerorgan@aol.com>
Re: [Residence Organs]  Orgoblo amperage/heaters
  by "Jon" <sparky@CEINetworks.com>
 

(back) Subject: Orgoblo amperage/heaters From: <Mpmollerorgan@aol.com> Date: Wed, 9 Jan 2002 21:16:09 EST   I borrowed a snap around meter and tested out my 2 HP orgoblow's current consumption and the readings showed it takes per hot wire a 35 amp peak to start and = then idles at 11-1/4 amps, opening up a 4" and (2) 3" windlines and weighed = down some keys so it was running pretty much at full load, raised the reading = to about 14 amps. Rectifier idling was about 4 amps.   Randall http://members.aol.com/mpmollerorgan/  
(back) Subject: Re: [Residence Organs] Orgoblo amperage/heaters From: "Jon" <sparky@CEINetworks.com> Date: Wed, 09 Jan 2002 21:31:48 -0500   That=B9s a lot of current.   On 1/9/02 9:16 PM, "Mpmollerorgan@aol.com" <Mpmollerorgan@aol.com> wrote:   > I borrowed a snap around meter and tested out my 2 HP orgoblow's current > consumption > and the readings showed it takes per hot wire a 35 amp peak to start and = then > idles at 11-1/4 amps, opening up a 4" and (2) 3" windlines and weighed d= own > some keys so it was running pretty much at full load, raised the reading = to > about 14 amps. Rectifier idling was about 4 amps. >=20 > Randall > http://members.aol.com/mpmollerorgan/ >=20 > DIYAPASON-L: a Discussion list for owners and builders of their own > Residence Pipe Organs. > HOMEPAGE : http://www.diyapason.pipechat.org > List: mailto:DIYAPASON-L@pipechat.org > Administration: mailto:owner-DIYAPASON@pipechat.org >=20 >=20